Đại diện phân phối độc quyền cảm biến áp suất Huba Control Miền Bắc

Pressure sensor 503 (cảm biến áp suất type 503)

OEM Pressure sensor 503
0 ... 2.5 - 25 bar

The relative pressure transmitter type 503 with proved ceramic technology features, adjusted and amplified sensor signals which are available as standardized voltage outputs. Designed for large batch production in OEM applications.

Fixed order quantities on request

Documents

Pressure sensor 505 (cảm biến áp suất type 505)

OEM Pressure sensor 505
0 ... 4 bar

The pressure transmitters of type 505 are measuring components for the measurement of pressure. They are suitable for analysing water pressure ratios in heating- and industrial circuits.
The novel ceramic measuring element with its included electronic gives a calibrated, amplified voltage signal.
Designed for large batch production in OEM applications.

Fixed order quantities on request

Documents

Download Certificate of tests

Pressure sensor 506 (cảm biến áp suất type 506)

OEM Pressure sensor 506
-1 ... 7 - 60 bar

The type 506 with proven ceramic technology, features adjusted and amplified sensor signals which are available as standardised current outputs. The pressure sensors are specially developed for use in the industrial refrigeration technology.

Fixed order quantities on request

Documents

Pressure sensor 510 (cảm biến áp suất type 510)

OEM Pressure sensor 510
0 ... 2.5 - 600 bar

These compact OEM pressure transmitters type 510 have been developed for applications in the industrial refrigeration technology.
The special sensor is based on thick-film technology, developed by Huba Control, which utilises a special grade of steel welded to the pressure sensor. This means that the 510 can be used for all gases and media in refrigeration, including ammoniac. Highest requirements concerning EMC and accuracy for all temperature ranges can be met in combination with the unique integrated electronic design.

Fixed order quantities on request

Documents

Pressure sensor 511 (cảm biến áp suất type 511)

OEM Pressure sensor 511
-1 ... 0 - 600 bar

These compact OEM pressure transmitters type 511 meet the highest specification for mechanical stress, EMC compatibility, and operational reliability, which means that this range is particulary suitable for all demanding industrial applications. This sensor utilises a ceramic technology, developed by Huba Control and for the last 20 years, in millions of applications, used in combination with unique integrated electronic design, means that the type 511 series has a high degree of accuracy for all temperature ranges. These units are available in small or production quantities, with an excellent price to performance ratio.

Fixed order quantities on request

Documents

Pressure sensor 515 (cảm biến áp suất type 515)

OEM Pressure sensor 515
-1 ... 0 - 600 bar

These compact OEM pressure transmitters type 515 meet the high est specification for mechanical stress, EMC compatibility, and operational reliability.
This sensor utilises a ceramic technology, developed by Huba Control and for the last 10 years, in millions of applications. Used in combination with unique integrated electronic design, means that the type 515 series has a high degree of accu racy for all temperature ranges. These units are available in small or production quantities, with an excellent price to performance ratio.

Fixed order quantities on request

Documents

Pressure sensor 516 (cảm biến áp suất type 516)

OEM Pressure sensor 516
–1 … 0 – 16 bar

This pressure transmitter is based on ceramic technology, developed by Huba Control and used for the last 20 years, in millions of applications. Used in combination with a unique integrated electronic design, this gives the type 516 series a high degree of accuracy for all temperature ranges. This technology with an amplified ratiometric output signal, supports direct assembly without the need for the user to adjust for temperature or pressure.

Fixed order quantities on request

Documents

Pressure sensor 520 (cảm biến áp suất type 520)

Pressure sensor 520
-1 ... 9 bar / 0 ... 2.5 – 600 bar

The compact type 520 pressure transmitter is based upon the Huba Control developed thick film technology where the pressure measuring cell is fully welded. This pressure transmitter meets the high burst protection demands and is suitable for the use in all types of refrigerants inclusive ammonia.

Documents

Pressure sensor 528 (cảm biến áp suất type 528)

Pressure sensor 528
–1 ... 0 – 60 bar

The compact type 528 pressure transmitter is based upon the well proven ceramic technology developed by Huba Control over 20 years ago. These pressure transmitters are suitable for applications across a broad spectrum of industries.

Documents

Pressure sensor 680 (cảm biến áp suất type 680)

Pressure sensor 680
0 ... 0.1 - 1000 bar

The pressure transmitters of type 680 with piezoresistive measuring elements have compensated, adjusted and amplified sensor signals which are available as standard voltage or current outputs. The transmitter housing is available with various pressure and electrical connections. Manufactured from stainless steel, its welded construction provides a watertight seal. With its sophisticated building block system, individual designs to meet specific applications are possible.

Documents

Download ATEX certificate

Pressure sensor 691 (cảm biến áp suất type 691)

Pressure sensor 691
-1 ... 0 - 600 bar

The pressure transmitter of type 691 with unique and for the last 20 years used in millions of applications ceramic technology, features adjusted and amplified sensor signals which are available as standardized voltage or current outputs. Various application-specific pressure and electrical connections can be provided.

Documents

Pressure sensor for shipbuilding 522 (cảm biến áp suất type 522)

Pressure sensor for shipbuilding 522
0 ... 2.5 – 600 bar

The compact type 522 pressure transmitter for shipbuilding is based upon the Huba Control developed thick film technology where the pressure measuring cell is fully welded. The pressure measuring cell incorporates a fully welded construction within the transducer housing. Highest requirements in various applications concerning burst can be met. All pressure transmitters of type 522 have the most important certifications for the shipbuilding industry.

Documents

Download ABS certification

Download GL certification

Download Bureau Veritas certification

Download DNV certification

Download Lloyd`s Register

Pressure sensor for shipbuilding 527 (cảm biến áp suất type 527)

Pressure sensor for shipbuilding 527
0 ... 1 – 60 bar

The compact type 527 pressure transmitter is based upon the well proven ceramic technology developed by Huba Control over 20 years ago.
These pressure transmitters are suitable for applications across a broad spectrum of industries and shipbuilding.

Documents

Download ABS certification

Download GL certification

Download Bureau Veritas certification

Download DNV certification

Download Lloyd`s Register

Differential pressure transmitter 401 (cảm biến chênh áp type 401)

OEM Differential pressure transmitter 401
0 ... 3 - 8 mbar

The type 401 pressure transmitter, with its unique proven ceramic lever technology, has adjusted, temperature-compensated sensor signals, available as a voltage output. The (VDC) voltage output is an amplified, linear signal suitable for direct processing in electronic control systems.

Fixed order quantities on request

Documents

Differential pressure transmitter 402 (cảm biến chênh áp type 402)

Differential pressure transmitter 402
0 ... 3 - 50 mbar

The differential pressure transmitter of type 402 with their proven ceramic fulcrum lever technology have adjusted, temperature-compensated sensor signals that are available with voltage outputs.
They are ideally suited for registering fine air flow in air conditioning technology and for measuring fine pressures in the environmental / medical technology sectors.

Documents

Differential pressure transmitter 403 (cảm biến chênh áp type 403)

OEM Differential pressure transmitter 403
0 ... 3 – 8 mbar

The differential pressure transmitter, with its unique proven ceramic lever technology, has adjusted, temperature-compensated sensor signals, available as a voltage output. The (VDC) voltage output is an amplified, linear signal suitable for direct processing in electronic control systems.

Fixed order quantities on request

Documents

Differential pressure transmitter 652 (cảm biến chênh áp type 652)

Differential pressure transmitter 652
0 ... 50 - 1000 mbar

Type 652 pressure transmitters are ideally suited to the continuous monitoring of liquid and gas flow (or level) in heating, ventilation and process technology. Their especially rugged construction allows a
single port over-pressure of up to 20 bar, depending upon pressure range.

Documents

Differential pressure transmitter 663 (cảm biến chênh áp type 663)

Differential pressure transmitter 663
-5 ... 5 mbar / 0 ... 5 - 2000 mbar

The pressure transmitter of product type 663 have calibrated and temperature compensated sensor signals which are available as voltage output. The amplified linear voltage output signal, can be connected directly into an electronic control system. The transmitter can be mounted directly due a pcb board or with a 2.5 mm plug connection.

Documents

Differential pressure transmitter 692 (cảm biến chênh áp type 692)

Differential pressure transmitter 692
0 ... 0.1 - 25 bar

The pressure transmitter of type 692 with proven, unique ceramic technology, features adjusted and amplified sensor signals which are available as standardised voltage or current outputs. Various application-specific pressure and electrical connections and housing materials suitable for different media can be provided.

Documents

Differential pressure transmitter 694 (cảm biến chênh áp type 694)

Differential pressure transmitter 694
-0.5 ... 0.5 mbar / 0 ... 1 - 50 mbar

The pressure transmitter of the Type 694 incorporate a proved ceramic fulcrum lever technology. They deliver adjusted temperature-compensated sensor signals, available as standard voltage or current outputs. They are ideal for registering low air flow in air conditioning systems and for the measurement of fine pressures in environmental, laboratory and cleanroom applications (air and non-corrosive gases).

Documents

Differential pressure transmitter 698 (cảm biến chênh áp type 698)

Differential pressure transmitter 698
-5 ... 5 mbar / 0 ... 10000 mbar

The pressure modules type 698 are suitable for monitoring pressure and flow in air conditioning systems and in the laboratory sector.
The module is optionally available with a 3 digit LED display, two limit value switches (potential-free) as well as a square root extraction.

Documents

Differential pressure transmitter 699 (cảm biến chênh áp type 699)

Differential pressure transmitter 699
-1 ... 1 mbar / 0 ... 0.3 - 50 mbar

These pressure transmitters type 699 are available in switchable pressure ranges and with digital device or Modbus. The full-version includes customer specific adjustment possibilities. Especially developed sensors for each pressure range allow a physically correct and long term stable measurement.
The large variety offers a manifold use in the air-conditioning technique as well as for fine measurement in industry or medical applications.

Documents

Download Operating instructions (small)

Download Operating instructions (full)

Download Operating instructions (modbus)

Electronic Pressure Switch 521 (Công tắc áp suất điện tử type 521)

Electronic Pressure Switch 521
0 ... 2.5 - 600 bar

The compact type 521 pressure switch is based upon the Huba Control developed thick film technology where the pressure measuring cell is fully welded.
Switching points set in factory are available both N/C and N/O function. Various electrical and pressure connections are available to suit given applications.

Documents

Electronic Pressure Switch 529 (Công tắc áp suất điện tử type 529)

Electronic Pressure Switch 529
-1 ... 0 - 60 bar

The compact type 529 pressure switch is based upon the Huba Control developed unique ceramic technology used for the last 20 years in millions of applications.
Switching points set in factory are available both N/C and N/O function. Various electrical and pressure connections are available to suit given applications.

Documents

Electronic Pressure Switch 540 (Công tắc áp suất điện tử type 540)

Electronic Pressure Switch 540
0 ... 60 – 600 bar

The µP-regulated, programmable pressure transmitter type 540 has a robust industry design. The parameters are easily adjustable with two function keys in the configuration menue which disposes of up to two programmable switching points. All systems are equipped with a diag nostic function. The large 4 digit LED display assures a good accuracy of reading. The pressure switch type 540 is based upon the Huba Control developed thick film technology where the pressure measuring cell is fully welded.

Documents

Electronic pressure switch 548 (Công tắc áp suất điện tử type 548)

Electronic pressure switch 548
-1 ... 0 – 40 bar

The µP-regulated, programmable pressure transmitter type 540 has a robust industry design. The parameters are easily adjustable with two function keys in the configuration menue which disposes of up to two programmable switching points. All systems are equipped with a diag nostic function. The large 4 digit LED display assures a good accuracy of reading. The pressure switch type 548 is based upon the well proven ceramic technology developed by Huba Control over 20 years ago.

Documents

Mechanical Pressure Switch 604 (Công tắc áp suất cơ type 604)

Mechanical Pressure Switch 604
0.2 ... 50 mbar

The ideal pressure switch to control air flows in air conditioning and ventilation systems, but equally effective in industrial air monitoring applications. This product range, which is classified in 5 pressure ranges, makes installation easy with features such as combibracket, screw terminals and snap-on cover. Of unique benefit is the high adjustment accuracy resulting from individual scale engraving.

Documents

Mechanical Pressure Switch 605 (Công tắc áp suất cơ type 605)

20 ... 400 Pa

OEM Relative and differential pressure switch
Type 605 pressure switches are specially developed for use in gas fired heating systems. There are more than 40 million switches in use worldwide. Produced on a fully automated production line. High setting accuracy and reproducibility, combined with excellent reliability characterise a quality of switch above the industry norm.

Fixed order quantities on request

Documents

Mechanical Pressure Switch 610 (Công tắc áp suất cơ type 610)

Mechanical Pressure Switch 610
-320 ... 500 mbar

The pressure switch of type 610 are specially suited for monitoring non-explosive gases in the machine and industrial equipment building industry in general, in process engineering or as control and monitoring elements in packing lines. Finely adjustable switching points and switching differences even in the higher ranges with exemplary reproducibility.

Documents

Download Operating instructions (vacuum)

Mechanical Pressure Switch 620 (Công tắc áp suất cơ type 620)

Mechanical Pressure Switch 620
2 … 220 mbar

Type 620 pressure switches, with 13 pressure ranges, are suitable for liquids and gases. Body materials are available in plastic, brass and aluminium, with a choice of NBR, FPM, EPDM and silicone diaphragms. Very high precision through finely tuned measurement stages and high longterm stability. Rugged design and especially suitable for use in general industrial equipment construction, process technology and food automation.

Documents

Mechanical Pressure Switch 625 (Công tắc áp suất cơ type 625)

Mechanical Pressure Switch 625
– 900 ... 6000 mbar

Type 625 pressure switches, with 13 pressure ranges, are suitable for liquids and gases. Body materials are available in plastic, brass and aluminium, with a choice of NBR, FPM, EPDM and silicone diaphragms. Very high precision through finely tuned measurement stages and high longterm stability. Rugged design and especially suitable for use in general industrial equipment construction, process technology and food automation.

Documents

Download Operating instructions (vacuum)

Mechanical Pressure Switch 630 (Công tắc áp suất cơ type 630)

Mechanical Pressure Switch 630
6 ... 5500 mbar

Differential pressure, vacuum and overpressure switches of type 630 are suitable for monitoring neutral and slightly aggressive liquids and gases. Switching element isolated from medium. Ideal for use as flow monitor in sanitary piping/ heating installations or for level monitoring in general in process technology applications. Extremely rugged construction with high functionality due to 10/20 bar safety margin in both pressure chambres.

Documents

Pressure level transmitter 681 (Cảm biến áp suất lưu lượng type 681)

Pressure level transmitter 681
0 ... 0.1 - 25 bar

The level sensing transmitter of type 681 with piezoresistive measuring elements have compensated, adjusted and amplified sensor signals which are available as standard voltage or current outputs. In the immersion-sensor version with a salt water and oil-resistant connection cable they are specially suited for level measurement, even in the presence of corrosive liquids.
The cable incorporates a tube for compensation of the ambient pressure.
Manufactured from stainless steel, its welded construction provides a watertight seal.

Documents

Pressure level transmitter 712 (Cảm biến áp suất lưu lượng type 712)

 Pressure level transmitter 712
0 ... 0.3 - 3 bar

The level sensing pressure transmitter Type 712 is manufactured using a relative and absolute pressure measuring cell with an adjusted and amplified sensor signal and is available with various cable lengths from 2 to 30 meters. The Type 712 offers EX protection as well as versions with integrated temperature measurement.
In addition to voltage and current outputs the Type 712 is available with ratiometric outputs.

Documents

Download IECEx certification

Digital Indicating Device 800 (Thiết bị hiển thị áp suất điện tử lắp trên tủ điều khiển type 800)

Digital Indicating Device 800
mbar / bar with 2 limit values

Type 800 digital indicators are equipped with a 4 digit display, as well as optional switch and analogue outputs. The sensor signal is evaluated and indicated as pressure by the digital display. The programming of the limit value output can be executed with the buttons on the front or via a data cable from a computer.

Documents

Digital Indicating Device 801 (thiết bị gắn thêm hiển thị áp suất tại chỗ 801)

Digital Indicating Device 801
LCD Module

Type 801 digital indicators are compatible with all sensors with DIN plug EN 175301-803-A. Independent of the mounting position of the sensor, the display can be rotated to give the ideal reading position. The 801 has a 3 digit liquid-crystal display which is adjustable by the customer, or available factory set.

Documents

Flow sensor 200 (cảm biến lưu lượng type 200)

OEM Flow sensor 200
0.5 ... 150 l/min

The flow sensor type 200 is based on the Kármán vortex street. You can choose between various versions as integrated temperature measurement. This flow sensor without moving parts is insensitive to pollution and persuade by very few loss of pressure and a very high accuracy.

Fixed order quantities on request

Documents

Download certicate of tests

Flow sensor 210 (cảm biến lưu lượng type 210)

Flow sensor 210
0.5 ... 150 l/min

In comparison to the OEM flow sensor (type 200) the type 210 is available with a larger variety concerning power supply and outputs. You can choose between various versions as integrated temperature measurement. This flow sensor without moving parts is insensitive to pollution and persuade by very few loss of pressure and a very high accuracy.

Documents

Flow sensor 230 (cảm biến lưu lượng type 230)

Flow sensor 230
1.8 ... 150 l/min

The flow sensor type 230 is based on the Kármán vortex street. You can choose between various versions as integrated temperature measurement. The type 230 has a rugged construction of red brass. With no moving parts the flow sensor is not sensitive to debris, has marginal pressure loss and high accuracy.

Documents

Flow sensor 235

OEM Flow sensor 235
1.8 ... 240 l/min

The difference between flow sensor type 235 and type 200 is the version of the case. The flow sensor type 235 is based on the Kármán vortex street. You can choose between various versions as integrated temperature measurement. This flow sensor without moving parts is insensitive to pollution and persuade by very few loss of pressure and a very high accuracy.

Documents

Flow sensor 236 (cảm biến lưu lượng type 236)

Flow sensor 236
1.8 ... 240 l/min

The difference between flow sensor type 236 and type 210 is the version of the case. The Vortex Sensor type 236 has a rugged construction of brass connection. This flow sensor is available with a larger variety concerning power supply and outputs. You can choose between various versions as integrated temperature measurement. Type 236 without moving parts is insensitive to pollution and persuades by very few loss of pressure and a very high accuracy.

Documents

Force cell 410

Force cell 410
40 to 265 Centi-Newton

The type 410 measures force with the cantilever beam by an integrated piezo-resistive wheatstone bridge with front-end amplification circuit. It uses hybrid thick film technology which guarantees an excellent stability and a long operating life. The special design of the force cell ensure batch production and with fully automated assembly an ideal performance to cost ratio for high quantities.

Fixed order quantities on request

Documents

Pressure measuring cell 509

OEM Pressure measuring cell 509
0 ... 2.5 - 250 bar

Type 509 pressure measuring cells are based on ceramic technology developed by Huba Control, and used for the last 20 years in millions of applications. Due to the robust design of the ceramic cell there are no significant changes in the sensor characteristics when mounted by the customer. The pressure measuring cells are delivered either factory set or with TK zero point adjustment. You can choose between various versions as integrated temperature measurement.

Fixed order quantities on request

Documents

Pressure measuring cell 513

OEM Pressure measuring cell 513
-1 ... 0 - 600 bar

Type 513 pressure measuring cells have an adjusted, amplified sensor signal. They are especially suitable for high quantities in OEM applications. The unique integrated electronics allow installation without the need for temperature and pressure adjustment by the customer.

Fixed order quantities on request

Documents

Pressure measuring cell OEM 513 - barometric sensor

Pressure measuring cell OEM 513 - barometric sensor
0.8 ... 1.4 bar

This pressure measuring cell, barometric adjusted with protection case is suitable for plug mounting on PCB. The output signal is linear, temperature compensated and amplified. The robust
construction guarantees a long term stable measuring result.

Fixed order quantities on request

Documents

Heat sink

Accessories

As a result of the heat sink it is possible to use medium with higher temperature.
The cooling section reduces the temperature of the hot media. Depending on the ambient temperature the use of medium with temperature of more than 200°C without harming the transmitter is possible.
Different standardised pressure connections allow the combination with the pressure measurement systems of Huba Control.

Documents